Skip to main content

Connect to server

Followings step introduces how to configure the Offision Device and connect to the server. If you does not install the application yet, please go to Player installation to install the application first.

Demonstration Video

External Link - Video

Player setup in public network

  1. When the player start normally, you should see the ONES Logo. (If you cannot see the logo, please refer to Player Set-up FAQ )
  2. Then it will show the 6-digit registration code and QR code for connection in the screen.
  3. Open Management console in your web browser. Navigate to Management console > Players page > click the + button
  4. Select which type of display to link with this player (e.g. room display / floor display, etc.)
  5. Fill in the related information of this player, such as which room to show on the room display.
  6. Enter the registration code on the player into the Registration code field (Enter the 6 characters code shown on the device screen).

7. If the connection to the player is success, the management console will then show the device information, while the player will change to the loading screen and turn into the player screen.

Management console

Player loading screen

  1. Click the Save button in the management console and finish the setup.

Player setup for a private network

  1. In case the player cannot connect to the open network for registration, it will fallback to the manual setup screen

  2. Enter the server address at Server URL field, e.g.

  • https://company.bookings.one

  • http://192.168.0.100

  1. Click Connect button, it will enter the loading screen and turn into the player screen.

  1. Then at the Management console -> Players page -> click the + button, the connecting device list will show this player

  2. Click Save button and finish the setup.